Anthony Gallo A'Diva Ti - Manual (Page 3)

Introduction
Welcome to Anthony Gallo Acoustics!
Thank you for choosing us! The A'Diva Ti was designed along the lines of our original Nucleus Micro
speakers, but thanks to its slightly larger size can be used without a subwoofer. Another distinct
advantage of this model is the high frequency capabilities of our new paper-damped Titanium drivers. The
spherical enclosure is ideally suited to perform in locations that would hinder most conventional designs
and their refined and natural sound will complement music, home theater, and multi-room systems.
Please take a moment to review the information in this manual so you can properly install your new
speakers. If you have any questions about this or any other Anthony Gallo Acoustics' product, please call
us at (800) 459-4183 or send us an e-mail at: [email protected] As one of our valued customers
your feedback is always welcome.
We think you'll be delighted at how easy it is to connect your A'Diva Ti Speakers, and how amazing the
sound quality will be. So read on, and let's get you started.
About your Nucleus Speaker "Break In"
Your new A'Diva Ti speakers will need a little time to develop their full sound potential. You'll hear a
marked increase in bass and treble response after about 50 hours of use.
Speaker Placement Tips
The A'Diva Ti isn't very placement sensitive, but to achieve maximum bass it should be situated near a
wall or large surface. We highly recommend using one of our various brackets or stands to successfully
integrate them into your system.
You can place them at any reasonable height, just make sure the speakers are aimed directly into the
prime listening location.
Since the A'Diva Ti is magnetically shielded it may be placed right next to a CRT-type television without
affecting its picture.
20 1