Argox AME-3230 Series User Manual
Page 7
13
AME Series User’s Manual
3. The battery is designed for fast-charge; after about 3.5 hours
(210 minutes), the Battery LED will turn off, signifying that the
battery is fully charged and ready for use.
Battery & Power Notifications
1. Do not disassemble the Battery Pack in case of malfunction.
2. Keep the Battery Pack and printer away from fire, liquids, and
conductive material, for your own safety and to avoid possible
damage.
3. Be sure only to use the Power Supply and Battery Pack provided
or approved by Argox.
4. Any damage caused by abnormal use will void the warranty.
5. When the battery not used in long-term, maintained of power at
50% and stored at -20 ~ 25 ° C.
Note: Operating the printer when charging will increase
charging time. Wait until battery is fully charged to
operate the printer.
14
AME Series User’s Manual