Argox AS-8020CL - Manual (Page 83)

77
Code 39
Insertion group number selection: Refer to page 57
th
Insertion group number selection of UPCA.
Format: The Full ASCII Code-39 is an enhanced set of
Code-39 that is the data with total of 128 characters to
represent Full ASCII code. It is combined one of the digits +,
%, $ and/ with one of the alpha digits (A to Z).
Append: This function allows several symbols to be
concatenates and be treat as one single data entry. The
imager will not transmit the embedded appending code
(space for Code-39). If Enable and other symbols were read
again with the appended code, then codes will be transmitted
without Code ID, Preamble and Prefix. When a symbol was
decoded without the appended code, the data will be
transmitted without Code ID and Prefix, but the Postamble
Suffix codes are appended. This function is used when the
first number of code 39 is a space. Example:
□123456.
Start/end transmission: The start and end characters of
Code-39 are“
★”. You can transmit all data digits including two
“
★”.
Option Bar Code Option Alphanumeric
Entry
Insert group number
selection
00-44 00-44
00
＊
Program