Denon AV SURROUND RECEIVER AVR-5308CI - Manual (Page 84)

1 Press [MODE SELECTOR] for the device you want to
reset.
2 Press and hold in [RC SETUP] for at least 3 seconds.
The signal transmission indicator flashes twice.
3
Press [9] , [7] and [6] , in that order.
The signal transmission indicator flashes twice.
4 Press the button you want to reset twice.
The signal transmission indicator flashes twice.
Resetting the Main Remote Control Unit
Learning Function
G Resetting button by buttonH
1
Press [MODE SELECTOR] for the device you want to
reset.
2
Press and hold in [RC SETUP] for at least 3 seconds.
The signal transmission indicator flashes twice.
3 Press [9] , [7] and [6] , in that order.
The signal transmission indicator flashes twice.
4
Press [MODE SELECTOR] for the device you want to
reset twice.
The signal transmission indicator flashes twice.
G Resetting by device modeH
1
Press and hold in [RC SETUP] for at least 3 seconds.
The signal transmission indicator flashes twice.
2 Press [9] , [7] and [8] , in that order.
The signal transmission indicator flashes twice.
3 Press [SYSTEM CALL] ( 1 , 2 or 3 ) you want to reset.
4
Press and hold in [RC SETUP] for at least 3 seconds.
The signal transmission indicator flashes twice.
1 Press [MODE SELECTOR] for the device you want to
reset (TV or SAT/CBL).
2
Press and hold in [RC SETUP] for at least 3 seconds.
The signal transmission indicator flashes twice.
3
Press [9] , [8] and [4] , in that order.
The signal transmission indicator flashes twice.
4 Press and hold in [RC SETUP] for at least 3 seconds.
The signal transmission indicator flashes twice.
1
Press and hold in [RC SETUP] for at least 3 seconds.
The signal transmission indicator flashes twice.
2
Press [9] , [8] and [1] , in that order.
The signal transmission indicator flashes 4 times.
All the settings are restored to their defaults.
System call function
Punch-through function
All settings Setting the Time the Backlight Stays Lit
1
Press and hold in [RC SETUP] for at least 3 seconds.
The signal transmission indicator flashes twice.
2
Press [9] , [7] and [3] , in that order.
The signal transmission indicator flashes twice and the backlight
on time setting mode is set.
3
Set the light on time.
The signal transmission indicator flashes twice.
[Settable times] : [1] : 5 sec.
[2] : 10 sec. (Default)
[3] : 15 sec.
[4] : 20 sec.
[5] : 25 sec.
Adjusting the Backlight’s Brightness
The display’s brightness can be adjusted in 5 steps.
(Default: Step 3)
1 Press and hold in [RC SETUP] for at least 3 seconds.
The signal transmission indicator flashes twice.
2 Press [CHANNEL +] or [CHANNEL –] .
The display gets one step brighter when [+] is pressed.
The display gets one step darker when [–] is pressed.
3 Press [RC SETUP] to complete the setting.

Get
ting Star
ted
Connections
Set
up
Pla
ybac
k
Remot
e Contr
ol
Multi-Zone
Inf
or
mation
Tr
oubleshooting
[NUMBER]
[MODE
SELECTOR]
[RC SETUP]
[CHANNEL+/–]
[SYSTEM CALL]
[ AMP]
Signal transmission
indicator
AVR5308CIEU_100_初校作成中.indd 81 2008/05/26 9:43:09