ART Pro Audio Auto-Tune Pre User Manual
Page 10
SPECIFICATIONS
Input Connections:
XLR-Female balanced or ¼-inch unbalanced
Output Connections:
XLR-Male balanced and ¼-inch unbalanced
Frequency Response:
20 Hz – 20 kHz, +/-1dB (typical)
Dynamic
Range:
>104dB
A-weighted
Tube
Type
Hand
Selected
12AX7A
(x1)
THD:
<0.05%
(typical)
CMRR:
>60dB
(typical)
Maximum Input Level:
+16dBu (¼-inch), +15dbu (XLR), +16dBu (Insert)
Maximum Output Level:
+18dBu (¼-inch), +24dbu (XLR), +16dBu (Insert)
Low Cut Filter:
Switchable, –3dB @ 100 Hz
Input Impedance:
5.5k Ohm(balanced XLR), 1M Ohm(unbalanced ¼-inch)
Output Impedance:
600 Ohm(balanced XLR), 300 Ohm(unbalanced ¼-inch)
Maximum Gain:
Switchable, +66dB (balanced in-out)
Phantom
Power:
Switch
selectable,
+48Volts DC, filtered, current limited
Chassis
Type:
Aluminum
anodized
with integral/stackable rubber sides
Power Requirements:
9VAC @ 700mA (typical)
9VAC @ 1000mA supply included with product
Dimensions:
1.75inch H x 5.9inch W x 6.5inch D
44.5mm x 150mm x 165mm
Weight:
2.5
lbs.
(1.14
kg)
Note: 0 dBu = 0.775Vrms
ART maintains a policy of constant product improvement.
Therefore, specifications are subject to change without notice.
for the latest information and on the Auto-Tune Pre.
Go to
for more information on Antares® and Auto-Tune®.
10