ART Pro Audio SGX Series - Guitar Effectss Processor - Manual (Page 36)

32
Since this delay algorithm has the characteristic of being in parallel with a
reverb program if used with one, it can be used to add a small amount of depth,
or wrap-around effect to the sound. A "hard reverb" effect may be achieved by
using longer delay and a moderate amount of regeneration. Tonal sounding drones
may be found using short delay and large amounts of regeneration.
REGEN-DDL-L
[REGEN-DDL-L], [DDL]
Regenerated Digital Delay - Long
Parameters:
:DELAY* = 0 to 1100ms [200ms]
increments:5ms;0-350, 10ms;350-700
20ms;700-1000, 50ms;1000-1100
D-FINE* = 0 to 50ms in 1ms increments [0ms]
:REGENeration = 0 to 100 percent in % increments [50%]
:LEVEL= 0 to 100 percent in % increments [100%]
*Total delay possible is 1150ms
Use this algorithm for the same reasons and applications as the short Regen-DDL,
only using longer delay times.
STEREO-DDL-S
[STREO-DDL-S], [DDL]
Stereo Digital Delay - Short
Parameters:
:DLY-L* = 0 to 1100ms [80ms]
:L-FINE* = 0 to 50ms in 1ms increments [0ms]
:DLY-R* = 0 to 1100ms [110ms]
:R-FINE* = 0 to 50ms in 1ms increments [0ms]
increments:5ms;0-350, 10ms;350-700
20ms;700-1000, 50ms;1000-1100
:REGEN = 0 to 100 percent in % increments [76%]
:HFDAMP = 0 to 100 percent in % increments [0%]
:LEVEL= 0 to 100 percent in % increments [100%]
*Total possible delay is 1150ms
STEREO-DDL-L
[STREO-DDL-L], [DDL]
Stereo Digital Delay - Long
Parameters:
:DLY-L=* 0 to 1300ms [250ms]
:L-FINE* = 0 to 50 ms in 1 ms increments [0ms]
:DLY-R* = 0 to 1300ms [125ms]
:R-FINE* = 0 to 50ms in 1ms increments
increments:5ms;0-350, 10ms;350-700
20ms;700-1000, 50ms;1000-1300
:REGEN= 0 to 100 percent in % increments [45%]