Artesyn ATCA-F125 Installation and Use Guide (April 2014) User Manual
Artesyn Equipment
Advertising
This manual is related to the following products:
Table of contents
Document Outline
- ATCA-F125 (6873M Artwork)
- Contents
- About this Manual
- Introduction
- Hardware Preparation and Installation
- Controls, LEDs, and Connectors
- Functional Description
- 4.1 Block Diagram
- 4.2 Processor
- 4.3 Memory
- 4.4 IPMI
- 4.5 FPGA
- 4.6 Boot and User Flashes
- 4.7 Base Channel Interface
- 4.8 Fabric Channel Interface
- 4.9 SFP+ Modules
- 4.10 AMC Bay
- 4.11 Telecom Clocking
- 4.12 Reset Structure
- 4.13 Interrupt Structure
- U-Boot
- 5.1 Overview
- 5.2 Accessing U-Boot
- 5.3 Configuring Boot Options
- 5.4 Selecting the Boot Flashes
- 5.5 Using the Persistent Memory Feature
- 5.6 Memory Map
- 5.7 Linux Devices
- 5.8 Power-On Self Test
- 5.9 ATCA-F125 Specific U-Boot Commands
- 5.10 ATCA-F125-Specific U-Boot Environment Variables
- 5.11 Updating U-Boot
- A Battery Exchange
- B Related Documentation
- Safety Notes
- Sicherheitshinweise