Artesyn ATCA-MF106 Installation and Use (September 2014) - Manual (Page 49)

ATCA-MF106 Hardware
ATCA-MF106 Installation and Use (6806800M62B) 49
2.6 Frame Ground and ESD
Frame ground connection is provided by the backplane connector FrameGND.
The face plate mounting holes of the board are connected to frame ground.
An ESD strip according to the AdvancedTCA specification PICMG 3.0 R3.0 for rear transition
modules (RTMs) is provided at one edge of the PCB.