Artesyn Centellis 2000 Shelf Release 3.0 Installation and Use (May 2014) User Manual
Page 110
Advertising
FRU Installation
Centellis 2000 Shelf Release 3.0 Installation and Use (6806800L99G)
110
3. Switch the breaker of the PEM to be replaced to the OFF (tripped) position, if it is not
already in this position.
4. Unfasten the two captive screws of the PEM.
5. Remove the PEM from the shelf bay by pulling the PEM handle.
6. Insert the replacement PEM.
7. Fasten the two PEM captive screws.
8. Switch the breaker to the ON position.
Advertising