Artesyn COMX-P2020 Installation and Use (February 2015) User Manual
Comx-p2020 module
Advertising
Table of contents
Document Outline
- COMX-P2020 Module
- Contents
- About this Manual
- Safety Notes
- Sicherheitshinweise
- Introduction
- Hardware Preparation and Installation
- 2.1 Environmental and Power Requirements
- 2.2 Default Settings
- 2.3 Unpacking and Inspecting the Module
- 2.4 Preparing the Installation Environment
- 2.5 Installing and Removing the Memory Module
- 2.6 Installing the MicroSD Card
- 2.7 Installing and Removing the Heat Spreader/Cooler
- 2.8 Installing and Removing the Module on the Carrier Board
- Controls, LEDs, and Connectors
- Functional Description
- Maps and Registers
- Firmware Upgrade
- Operating System and Driver Support
- A Related Documentation