Artesyn COMX-P4080 Installation and Use (August 2014) - Manual (Page 35)

Chapter 2
COMX-P4080 COM Express Module Installation and Use (6806800L20C) 35
Hardware Preparation and Installation
2.1 Environmental and Power Requirements
2.1.1 Environmental Requirements
The following table lists the environmental requirements that the board must meet when
operated in your particular system configuration.
Operating temperatures refer to the temperature of the air circulating around the board and
not to the component temperature.
Product Damage:
 High humidity and condensation on surfaces cause short circuits.
 Do not operate the system outside the specified environmental limits. Make sure the
product is completely dry and there is no moisture on any surface before applying
power.
Table 2-1 Environmental Requirements
Requirement Operating Non-Operating
Cooling Method Forced-air
Temp Cycle Class -40 to +85 °C:500cyc
Temperature 0 to 55 °C -40 to 85 °C
Humidity 10-90% (non-condensing)
Vibration 0.01g^2/Hz @ 5-500 Hz
Shock 20 g 11 ms sine or saw
Altitude -60 to 4000 m ASL