Artesyn MVME2500 ECC Installation and Use (August 2014) - Manual (Page 52)

Controls, LEDs, and Connectors
MVME2500-ECC Installation and Use (6806800N30F) 52
3.4.2.2 SATA Connector (J3)
The onboard customized SATA connector is compatible with the Artesyn SATA kit, namely
VME-64GBSSDKIT and IVME7210-MNTKIT.
GND
10 Master OUT Slave IN (MOSI)
Table 3-8 Flash Programming Header (P7) (continued)
Pin Signal Description
Table 3-9 Custom SATA Connector (J3)
Pin Signal Description Pin Signal Description
1 GND 21 GND
2 GND 22 SATA POWER ENABLE
3 NC 23 NC
4 SATA TX + 24 SATA DETECT
5 NC 25 NC
6 SATA TX - 26 GND
7 GND 27 NC
8 GND 28 GND
9 GND 29 GND
10 GND 30 GND
11 NC 31 +3.3V
12 SATA RX - 32 +5V
13 NC 33 +3.3V
14 SATA RX + 34 +5V
15 GND 35 +3.3V
16 GND 36 +5V
17 NC 37 +3.3V
18 GND 38 +5V