Avery Dennison Pathfinder 6057 LNT Programmer Manual using XML - Manual (Page 38)

3-18 LNT Programmer’s Manual
Defining the Line Thickness Tag (Required)
The Line Thickness tag defines the thickness of the ellipses’ lines.
Valid values include: An integer or float (in selected units).
It contains the following attribute: units.
Syntax
<LineThickness units=”value”>value</LineThickness>
units Unit of measure. Options:
Inches Inches
MM Millimeters
Pi xels Pi xels (default)
Example
<LineThickness units=”Inches”>0.10</LineThickness>
Defines the ellipses’ lines as 0.10 inches thick.
Defining the DrawMode Tag (Optional)
The DrawMode tag specifies the transparency of the bounding box.
Valid values include: Transparent, Opaque, and XOR. The default is Transparent.
Transparent The bounding box does not block out (or “erase”) existing fields except
where data appears in the bounding box.
Opaque The bounding box blocks out (“erases”) existing fields below it.
XOR The data in the bounding box appears inverted (white image on a black
background).
Syntax
<DrawMode>value</DrawMode>
Example
<DrawMode>Opaque</DrawMode>
Sets the box field’s DrawMode to opaque, which erases any other fields on the label with the
same coordinates.
Defining the LineColor Tag (Optional)
The LineColor tag sets the line’s color to black or white.
Valid values include: Black, W hite, or hex encoded RGB value in the format #RRGGBB. The
only valid hex values are #FFFFFF (white) and #000000 (black). The default is Black.
Syntax
<LineColor>value</LineColor>
Example
<LineColor>Black</LineColor>
Sets the line’s color to black.
Defining the FillColor Tag (Optional)
The FillColor tag sets the fill color for the ellipse to black or white.
Valid values include: Black, W hite, or hex encoded RGB value in the format #RRGGBB. The
only valid hex values are #FFFFFF (white) and #000000 (black). The default is Black.
Syntax
<FillColor>value</FillColor>
Example
<FillColor>Black</FillColor>
Sets the ellipse’s fill color to black.