Avery Dennison Pathfinder 6057 LNT Programmer Manual using XML - Manual (Page 59)

Error Messages 6-1
E R R O R M E S S A G E S
This chapter provides explanations of your printer’s errors. The errors are listed in
order. If you have trouble loading supplies or performing maintenance, refer to the Operator’s
Handbook or Equipment Manual. Call Technical Support if you receive any error message not
listed in this chapter.
Error Description
Code
5 Label Size Image width is invalid. See “ Defining the LabelSize Tag (Required) ” for
more information.
12 Image Size Height is invalid. See “ Defining the ImageSize Tag (Required) ” for more
information.
13 Image Size W idth is invalid. See “ Defining the ImageSize Tag (Required) ” for more
information.
18 More data provided than amount specified in <data min max> tag. See “ Defining the
Data Tag (Optional) ” for more information.
21 Horizontal justification is invalid. See “ Defining the HorizontalJustification Tag
(Optional) ” for more information.
31 Human readable font selection is invalid. See “ Defining the UPCA/UPCE/EAN Options
Tag (Optional) ” for more information.
32 Bar code type is invalid. See “ Defining the Type Tag (Required) ” for more information.
33 Bar code density is invalid. See Chapter 4, “ Defining Bar Code Options ” for more
information.
102 The print quantity is invalid. See “ Defining the Quantity Tag (Optional) ” for more
information.
106 The print multiple is invalid.
210 Bar code security level is invalid. See Chapter 4, “ Defining Bar Code Options ” for
more information.
213 PDF417 data is invalid. See Chapter 4, “ Defining Bar Code Options ” for more
information.
223 Bar code option is invalid. See Chapter 4, “ Defining Bar Code Options ” for more
information.
255 Supply type is invalid.
256 Energy setting is invalid. See “ Defining the Energy Tag (Optional) ” for more
information.
257 Feed mode is invalid.
258 Supply position is invalid.
259 Contrast is invalid.
260 Print Adjustment is invalid.
261 Margin Adjustment is invalid.
262 Speed Adjustment is invalid.
287 Printhead W idth specification is out of range.
288 Printer voltage is out of range.
6