Cleaning the printhead, Cleaning the printhead -2 – Avery Dennison Monarch 9416 XL Printer Equipment Manual User Manual
Page 20
C l e a n i n g t h e P r i n t h e a d
Clean the printhead whenever you notice a decline in print quality, or after using three
rolls of supply.
Note: You must turn the printer’s power off before cleaning the printhead. If you
need to clean the printhead during a print job, you may lose your data when
you turn off the printer.
1. Turn off the printer. Press the switch on the back of the printer to the OFF
position (O).
2. Press the cover release levers towards the front of the printer to release the cover.
3. Lift open the cover.
4. Moisten a cotton swab with isopropyl alcohol.
5. Rub the cotton swab across the printhead to remove any build-up.
6. Allow the printhead to dry for one minute before you close the cover and resume
printing.
3-2 Equipment Manual