Avery Dennison PCL - Manual (Page 24)

22 •••• Reference Guide PAXAR PCL
~FG99 630,650,960,6X6,SNAP
This command specifies the beginning of a logo field where 99 is replaced with the
number of logos that will appear in this field. Refer to Appendix E for details about
printing logos and graphic image fields.
Note: This command tells the printer that the following commands are for this new
logo field. Any commands other than logo or general field commands are
ignored. The description of this field ends when the printer is sent a new
beginning of field command (FA, FB, FS, FY, FL, or FM) or the end of format
layout description command (XZ).
Compatibility Note:
650 The 650 is only capable of one logo per logo field. In order to have multiple
logos, multiple logo fields will have to be created. If the number of logos specified
in the command is greater than one, the 650 will map only the one logo.
~FS99 630,650,960,6X6,SNAP
This command specifies the beginning of a care symbol field where 99 is replaced by
the number of symbols that will appear in the field.
Note: This command tells the printer that the following commands are for this new care
symbol field. Any commands other than care symbol or general field
commands are ignored. The description of this field ends when the printer is
sent a new beginning of field command (FA, FB, FG, FY, FL, or FM) or the
end of format layout description command (XZ).
Compatibility Note:
650 The 650 can only do one care symbol per field. In order to print multiple care
symbols multiple care symbol fields must be used.
~FY99 960
This command specifies the beginning of a special symbol field where 99 is replaced by
the number of symbols that will appear in the field.
Note: This command tells the printer that the following commands are for this new
special symbol field. Any commands other than special symbol or general
field commands are ignored. The description of this field ends when the
printer is sent a new beginning of field command (FA, FB, FG, FS, FL, or FM)
or the end of format layout description command (XZ).
~FM 630,6X6,SNAP
This command specifies the beginning of a graphic image field. Graphic images
supported are PCX and BMP. The graphic image must follow industry standards for
PCX and BMP file structures. Many applications produce both files. Refer to
Appendix E for details on printing logos and graphic image files.
Note: This command tells the printer that the following commands are for this new
special symbol field. Any commands other than special symbol or general
field commands are ignored. The description of this field ends when the
printer is sent a new beginning of field command (FA, FB, FG, FS, or FL) or
the end of format layout description command (XZ).
~FK99 700RFID
This command specifies the beginning of an RFID field where 99 is replaced with the
maximum number of characters in the data string for the field. The data string