Avery Dennison 7410 Network Card Setup Guide - Manual

Paxar is a trademark of Paxar Corporation.
Monarch , MonarchNet2, 7410, and 9855 and 9860 are trademarks of Paxar Americas, Inc.
Microsoft, Windows, and NT are either registered trademarks or trademarks of Microsoft Corporation in the
United States and/or other countries.
Novell and NetWare are trademarks of Novell, Inc. in the United States and other countries.
HP Jet Admin and HP Web Jet Admin are trademarks of Hewlett-Packard, Inc.
Other products are trademarks or registered trademarks of their respective companies and are hereby
acknowledged.
TC7410MN2SG Rev. AA 9/05 2005 Paxar Americas, Inc. All rights reserved.
E T H E R N E T S E T U P G U I D E
The Monarch 7410 Ethernet Print Server makes it easy to setup and
configure printers on a network. You can also remotely manage and
download print batches, formats, printer configurations, and fonts. This
print server supports the Monarch 9855™ or 9860™ printer linked to a
Ethernet connection. MonarchNet2™ software is available on your printer for
a licensing fee. Contact your sales representative for more information
about MonarchNet2, or visit our Web site (www.paxar.com).
The print server supports multiple network protocols for users with
Telnet/FTP, Microsoft Windows 95/98/2000 or Windows NT, TCP/IP
(including lpr/lpd, Bootp, DHCP, and HP JetDirect), Novell NetWare
and SNMP. All protocols are simultaneously active.
Note: When turning on the printer or after sending a ^PR (printer reset)
immediate command, wait at least eight (8) seconds before sending
data to the print server. Any data sent to the print server before the
8-second interval may be lost.
S e t t i n g U p t h e P r i n t S e r v e r
From the Main menu, select Setup, Port Settings, then Parallel Comm.
Then, follow these steps:
1. Press or until you see
PARALLEL COMM
Port
2. Press Enter/Pause. You see the current setting, for example
PORT
Internal