Avery Dennison 7410 Network Card Setup Guide User Manual
Page 2
Advertising
2
3. Press Enter/Pause to select the internal port. After setting the port to
internal,
change the MODE to enable bi-directional communications.
4. Press
or
until you see
PARALLEL COMM
Mode
5. Press Enter/Pause. You will see
MODE
Compatible
6. Press
to display the other option, IEEE1284 and press Enter/Pause.
This selects IEEE1284 for bi-directional Ethernet communications.
(Compatible mode is used with a computer connection and a parallel
cable.) If you want to use the parallel port, set the Port to “External.”
Ethernet Port
Parallel Port
Serial Port
Antenna
Advertising
This manual is related to the following products: