Avery Dennison 9850 Addendum Version 3.0 - Manual

TC9850AD2 Rev. AA 10/01

2001 Paxar Corporation. All rights reserved.
O P E R A T O R ' S A D D E N D U M
This addendum describes the software changes available in
release 3.0 of the Monarch

9850

printer. This addendum contains information
about the revised and new menu selections.
R e v i s e d M e n u S e l e c t i o n s
The items in the Setup, Supply menu have been re-arranged. The new structure is
shown below.
MAIN MENU
Positioning Menu
The positioning menu includes Print Position, Supply Position, Margin Position, and
Cut Position.
♦ Print position adjusts the data vertically on the supply.
♦
Supply position adjusts the printer to print at the vertical 0,0 point. Adjust this
position only on initial printer setup, if necessary. For format adjustments, use
Print position.
♦
Margin position adjusts the data horizontally on the supply.
♦ Cut position adjusts where the tag is cut.
Refer to the Operator’s Handbook (available on our Web site) for more information
about changing these positions.
Supply
Type Back
feed
Ribbon Speed Feed
Mode Posit-
ioning Separ-
ators Verifier
Setup
Supply