Avery Dennison 9850 Addendum Version 3.0 User Manual
Page 3
3
Formatting Flash Memory
Before downloading a script or if the printer’s firmware is updated, you m ust format
the flash memory. Formatting flash memory is only required once during initial
printer setup.
When you format flash memory, the script and any
downloaded TrueType
fonts saved in the printer’s flash
memory are deleted and must be resent to the printer.
1.
To format flash memory, from the Setup Menu, press l or r until you see
SETUP
l Flash Memory
2.
Press Enter/Pause.
FLASH MEMORY
Format Flash r
3.
Press Enter/Pause.
Are you sure?
No r
4.
Press r to display “Yes” and press Enter/Pause.
CREATING FLASH
FILE SYSTEM 1
The printer’s flash memory is cleared and reformatted. This process may
take several minutes. The printer reboots automatically after formatting
flash memory.