Avery Dennison Full Size Sensor - Manual (Page 11)

Service Manual Full Size Sensor
11/07
Rev. 1.03 11
The upper – rear axle fits into the hole of the metal part
Guide the cable of the full size sensor the same way the other sensor cable is guided
into the printer (trough the metal casting)
Press the inner side plate against the metal casting – the two axles fit into the holes in
the metal casting
Press the outer side plate against the steel plate and fix it with the hexagonal screws
in a way that the whole assembly is fixed secure
Take care that the inner media guiding is fixed in the correct position to the axle (iiner
zero line)