Avery Dennison Monarch 9906 Knife - Manual (Page 2)

U s i n g t h e K n i f e
Setting the Knife Operation
The knife has three operating modes; Disabled, Cut Each Tag, and Cut Each Batch. To change the
setting, from the Main Menu, select Setup, then Supply. Then, follow these steps.
1.
Press  or  until Cut Mode is on the display.
SUPPLY
← Cut Mode →
Disabled
CHANGE BACK
1.
Press CHANGE to highlight the knife operation options. The current setting is shown.
2.
Press  or  to see the options.
SUPPLY
Cut Mode
Cut Each Batch
SET CANCEL
3.
When the knife operation setting you want is on the display, press SET to save the change.
Press CANCEL to leave the knife operation unchanged.
4.
Press BACK until you return to the Home/Online screen.
SUPPLY
← Cut Mode →
Cut Each Batch
CHANGE BACK
2