Avionics Innovations AI-CD II P/N: 14001-20 Operation Manual - Manual (Page 5)

Avionics Innovations
AICD II Operation Manual
5
DISPLAYING TIME
(1) Press the (TITLE/CLOCK) button repeatedly until the clock time is
displayed. Each press changes the modes as follows:
Clock Priority Mode / Station Title mode or CD Title mode / Normal
Mode
Note: Selecting any tuner or CD function while in the clock priority
mode will interrupt the time display momentarily. The function
selected will be displayed for about 5 seconds before the time returns
to the display.
SETTING TIME
(1) Press and hold the (TITLE) button for at least 3 seconds while the
time is displayed until the time indication blinks.
(2) Rotate the (Audio/Control) knob to adjust the hours while the time
indication is blinking.
(3) When the hours has been adjusted, press the (Audio Control) knob.
(4) Rotate the (Audio Control) knob to adjust the minutes while the time
indication is blinking. The time is automatically set 5 seconds after
the minute adjustment. The time can also be manually set by pressing
the (Audio Control) knob.
Automatic Memory of Station Presets
(1) Press the (SOURCE) button to select radio mode
(2) Press the (BAND) button until the desired radio band is displayed
(3) Press and hold the (TUNE) button for at least 3 seconds. The
frequency on the display continues to change while the automatic
memory is in process. The tuner will automatically seek and store 6
strong stations in the selected band onto the 1 – 6 buttons in order of
signal strength.