Avionics Innovations AI-CD II P/N: 14001-20 Operation Manual - Manual (Page 9)

Avionics Innovations
AICD II Operation Manual
9
DISPLAYING STATION TITLES
(1) If a title has been entered for the selected station, it can be displayed
in place of the frequency. The display will toggle between the
frequency and title displays with each press of the (TITLE) button.
FM1 1 90.1
FM1 1 12:58
FM1 1------------ (Title not entered)
FM1 1 DISCO (Title entered)
TITLING STATIONS
(1) Tune in a station to be titled.
(2) Press the (TITLE) button twice (once if you are already in the Clock
Priority mode) to select the preset station titling mode. “-------------
“will flash in the display.
(3) Press and hold the (TITLE) button for at least 3 seconds. The first
digit will blink.
(4) Rotate the (Audio Control) knob to select the desired
letter/numeral/symbol available for naming (“A” for example).
(5) Press the (Audio Control) button to store the first character. The first
character will stop blinking and the display will automatically
advance to the next character. When that character begins to blink,
you may choose the next letter or symbol of your title.
(6) Repeat the steps 4 and 5 above to complete the titling. All 8
character positions should be filled. Use spaces where characters are
not needed (for example at the end of a 5 character title, use 3 spaces
to complete the title).