Aviosys 9258W2 - Manual

1
IP Power 9258W2 Quick Installation
Package :
 9258W2 Box x 1  QI & CD : With Software , QI and Manual.
 WiFi Athena stick x 2
 IR Remote Controller x1 Option : * Power Cable .
* Network cable ( RJ45 )
Interface :
Front View
Power Status Indicator: The Power Status Indicator each outlet status
- Green light as power ON
Reset :
There are 2 function for this button.
* Enable WPS function by one short click
There is one long beep as enable WPS function. Please refer page
#16 for details.
* Set back to default setting by long press
To reset to original manufacture settings, hold down the reset
button with a sharpen pin for
5- 6 seconds then release.
Then there are 3 beeps response ( short
–- mid long – short ) which
means reset successfully and 9258W2 will be rebooted itself ( one
beep after reboot ) and most information go back to default setting.
Restart : The restart button just resets the device by turning off and then
turning on the power.
Link:
The Link Indicator shows the WIFI signal transfer status. The light
will be always ON and flashing while transfer data.
IR Receiver :
This area is for receiving the signal from handheld IR remote
controller which comes with shipping package.
Network: 10/100 Mbps network
USB:
USB 2.0 for USB Web Camera.
(With UPNP & video format as M-JPG / YUV )