Aviosys 9258S - Manual (Page 24)

IP POWER 9258 USER MANUAL
VER. 5.01 - 23 -
Setting of software shut down controlled PC/ Server
9258 can be used to safely turn off the PC/Server through Network. With this feature you can
remotely shutdown any PC/ Server which that is connected to the IP Power 9258 through normal
Windows shut down procedure. Before operating the software shutdown function it is essential to
install our software:
1.
Please install program “IP9258service.exe “into the PC that will be controlled.
2. Documents created in programs like Microsoft office will not be automatically saved. The
9258 will still shutdown the controlled PC/server without saving the file.
3. You will need to reserve enough time for controlled PC/Server to shutdown after receiving a
command from the 9258. Please set the delay time at 30 or 60 second in 9258 configuration
webpage (setup --> delay switch).
4. The controlled PC/Server must be in the same ETHERNET and the same SUBNET as the
9258.
Installing and Setup of the “IP9258service.exe”:
1. Insert the CD that came with the device into the PC that you want to be able to turn off.
2. On the left hand side click on the Icon.
3. Go to the 9258 Series section and click on the Link that says Shutdown Program
4.
Save to your desktop and double click “ IP9258config.exe” ，to install the program:
5. Please fill correct information in each section :