Initial settings – Aviosys 9258S User Manual
Page 8
IP POWER 9258 USER MANUAL
VER. 5.01
- 7 -
Software installation
Please follow the steps below to install the software.
1.
Insert the Installation CD in the package and windows will auto-run. If not please browse for
the Autorun.html file in CD.
2.
Click 9258S & 9258T in the IP POWER section of the installation CD
3.In stall IP Family to your desktop or any other place of your choosing
4. After you have saved it onto your desktop it is ready to be used.
5. Initial Settings
Initial setting through the Ethernet
Open
“IPEdit.exe”. Make sure that the IP Power 9258
is properly turned on and there is an ethernet connection
connected by a RJ45 cable.
In the local devices section of IPEdit all products under the same subnet network will appear.
Please refer to below:
.