Aviosys 8870 - Manual (Page 4)

4
SDK
For user to arrange own development :
 Developing environment: :
VB.NET 2008 , Microsoft NET. Framework Version 3.5 , Microsoft office access 2007
USB CDC series emulation model .
USB e-Meter 8870 support USB CDC emulation model , Please refer the following :
1. First , make sure that the 8870 is connect with your PC. Please go to
Control Panel  System  Device manager  Ports(COM& LPT)  Aviosys Port (COM X)
2. Then open Hyper terminal to connect with 8870.
Start  All programs Accessories  Communication  Hyper terminal
* There is no Hyper terminal program in WIN 7. Please use other serial software like Putty .
Select the COM port 8870 use .
3. Setup “ Bits per second” as 19200 and “ Flow control” as NONE. Then press OK to log in .
RS232:
 Read Device model : Command is ~
 Read current : Command is @
Thank you for support Aviosys .
If any question please email to our Service Dep. : [email protected].