Aviosys 8810-S - Manual (Page 11)

11
SDK - USB CDC emulation mode
For user to arrange its own development :
 Developing environment: :
- VB.NET 2008
- Microsoft NET. Framework Version 3.5
- Microsoft office access 2007
USB CDC emulation mode .
Please refer the setting as following :
1. First , make sure that the 8810-S is connect with your PC. Please go to
Control Panel  System  Device manager  Ports(COM& LPT)  Aviosys Port (COM X)
2. Then open Hyper terminal to connect with 8810-S.
Start  All programs Accessories  Communication  Hyper terminal
* There is no Hyper terminal program in WIN 7. Please use other serial software like Putty .
Select the COM port 8810-S use .
3. Setup “ Bits per second” as 19200 and “ Flow control” as NONE. Then press OK to log in .
After go into the command windows, please press “ enter “ key to get all the command .