Aviosys 8800 - Manual (Page 15)

15
Controlling Power Remotely
Using Mac
With CNT technology connecting to your device without any type of port forwarding has become easy.
When you select this option to control the device using Mac you will be required to use this following
program:
- IP Power Center
With IP Power center you can connect to your device from any networked location. By searching for
the name of your device you can easily find the device in the network and control it from another
computer.
To do this, follow these following steps:
1.) First make sure that remote control portion on the USB Power Software is set correctly.
Make sure to use a User name and Password that is distinct to your device
In this case:
Username is: usbpower
Password is: 12345678
2.) Then open up IP Power Center on a computer that is in the same network and click on search
local network.