Deni Magic Vac Vantage Commercial Quality Vacuum Sealer 1940 - Manual (Page 8)

7
MAGIC VAC ™ Vantage
Commercial Quality Vacuum Sealer
USING MAGIC VAC SMOKED CANISTERS
NOTE: The jar attachment is not needed for these canisters. These
new canisters have a star shaped knob with an opening to fit the
hose port.
Canisters are sold seperately.
1. Fill container. For the vacuum to operate properly,
leave at least 1” space at the top of the canister.
2. Placement of canister lid. Make sure that both the rim
of the canister and the seal of the lid are clean and free
of food particles before placing the lid on the canister.
Turn the arrow on the canister lid knob to “VACUUM”.
3. Connecting the canister to the unit.
Push one end of the Hose firmly into
the canister lid knob. Push the other
end firmly into the Hose Port on the
vacuum sealer.
4. Engage vacuum. Close the Lid on the unit. Push
down on the front corners of the Lid with your thumbs
and push the Lock Buttons into the locked position.
The machine will carry out a vacuum packing cycle
and turn off automatically on its completion.
5. Turn the arrow on the canister lid knob to “CLOSED”.
6. Remove the Hose from the Hose Port and canister.
7. Opening a vacuum-sealed canister. Turn the arrow on
the white knob to “OPEN”; you will hear the sound of
air whistling back into the canister.
USING MAGIC VAC UNIVERSAL LIDS
NOTE: DO NOT vacuum package food in bowls or containers
made out of the following material: thin glass, crystal, aluminum, or
plastic. The powerful vacuum may cause the material to collapse.
Universal lids are sold seperately.
1. Fill container. For the vacuum to operate properly, leave
at least 1” space at the top of the container.
2. Placement of canister lid. Make sure that both the rim of
the container and the seal of the universal lid are clean
and free of food particles. Place lid on container. Turn
the arrow on the lid knob to “VACUUM”.
3. Connecting the canister to the unit. Push one end of
the Hose firmly into the universal lid knob. Push the
other end firmly into the Hose Port on the vacuum
sealer.
4. Engage vacuum. Close the Lid on the unit. Push down
on the front corners of the Lid with your thumbs and
push the Lock Buttons into the locked position. The
machine will carry out a vacuum packing cycle and turn
off automatically on its completion.
5. Turn the arrow on the universal lid knob to “CLOSED”.