Baby Lock Momentum Quilting Frame (BLQM) Instruction and Reference Guide - Manual (Page 21)

Fig-S. 3-1
Fig-S. 3-3
Take up Rail
Rail Clamp
Clip
Take up Rail
Idler Rail
Take Up Leader
Fig-S. 3-2
Rail Clamp
Clip
Take up Rail
Idler Rail
Batting
Fabric Fig-S. 3-4
Rail Clamp Clip
Take Up Leader
Idler Rail
Take up Rail
Page. 20
Tools Required:
1- Fabri-Fast Tool
4- Fabri-Fast Tube (Crib or King)
Note: This assembly step is universal for both Crib
and King size frames.
Section 3-1: Move the sewing machine back so that
the Take Up Rail moves to the rear position. (Fig-
S. 3-1) Unplug the power cords so the Take Up Rail
stays in the rear position.
Section 3-2: Pull the Rail Clamp Clip out and twist
the Idler Rail Clamp open. (Fig-S. 3-2)
Section 3-3: Attach the Take Up Leader into the
Take Up Rail using the Fabri-Fast System. (Fig-S. 3-3)
Section 3-4: Feed the Take Up Leader through the
Idler Rail hinged slot. (Fig-S. 3-3)
Section 3-5: Pin the fabric and the batting to the
Take Up Leader. (Section 2: Leader Cloth and Fig-S.
3-3)
Section 3-6: Clamp the fabric by latching the Rail
Clamp Clip. (Fig-S. 3-3 and Fig-S. 3-4)
Section 3: Attaching Fabric on the Frame Rails