Baby Lock Sashiko 2 (BLQK2) Quick Reference Guide - Manual (Page 2)

Double click the positioning button. The needle will remain in the
down position and the green LED will flash on and off.
Press and release the foot control one time, the needle moves
one complete cycle (one stitch and spacing) and then will stop at
the next green LED lit position.
The specialty stitch mode is useful for attaching braid and one stitch
sewing where a complete cycle (one stitch and spacing) is required.
Specialty Stitch Mode to Normal Mode – press the positioning
button one time and the needle moves to the up position.
Specialty Stitch Mode
Loading Position
Inserting the Bobbin
10" (25cm)
Blue and Yellow LED is lit when:
Needle in Up Position
Side cover is closed
Presser foot is down
Latch wire not engaged
in release position
Yellow LED is lit with flashing
Orange LED when:
Presser Foot in UP Position
Side cover is open
Latch wire engaged in
release position
Yellow Mark