BAFO BF-6250 - Manual (Page 8)

USB2.0/SATA 2.5”hard disk Enclosure User’s Manual 7
7.4 Windows ® ME installation
7.4.1 Connect the USB port of USB2.0/SATA 2.5” HDD enclosure to PC with
USB cable. Then system will automatically load driver for this device.
7.4.2 After Windows ® installed all the driver, you have to check “My
Computer”-“Control Panel”-“System”- ”Hardware”-”Device Manager”
to make sure the driver has already installed, in the “Disk Drives” it will
show a “FUJITSU MHS2030AT”
(This model number will vary with
different Hard Disk) , and in the “Universal Serial Bus controller” it will
show a new item of “USB Mass Storage Device”
7.4.3 Double click on “My Computer” icon on the desktop, if the driver has
already installed and can works properly, you can see a new disk icon and
named “F:” appears on the desktop.