BAFO BF-5231 - Manual (Page 3)

1394a+USB 2.0 Combo 4 Ports Cardbus Quick User’s Guide 3
4.2.10 Select “The updated driver (Recommended)”. Texas Instrument
OHCI Compliant IEEE 1394 Host Controller and click “Next”. Then
click “Next” to continue
4.2.11 If display “Insert Disk” (Please insert the disk labeled windows 98
second edition CD-ROM) and click “OK”, then click “Finish” to exit the
wizard
4.3 Verifying the Installation under Windows 98 and ME
4.3.1 Right click on “My Computer” icon, select “Properties”, left click on
“Device manager” button
4.3.2 Double click “Universal Serial Bus controller”, If there is no yellow
“!” or “?” in front of
NEC PCI to USB Enhanced Host Controller
NEC PCI to USB Open Host Controller
NEC PCI to USB Open Host Controller
USB ROOT Hub
USB ROOT Hub
4.3.3 Double click on “IEEE 1394 Bus host Controllers”, if there is no
yellow “!” or “?” in front of “Texas Instrument OHCI Compliant IEEE
1394 Host Controller” the driver has started correctly
4.3.4 To view information about the device attached to the controller, right
click the “Device” and select Properties from the context menu, then
select the tab labeled “General”
4.4 Windows ® 2000 Driver Installation
4.4.1 Put the driver CD into the CD-ROM and run the driver from the
“D:\DRIVER\1394a+USB 2.0 Combo 4 ports Cardbus\Windows\
U2v2_1_4.exe” (D: represent CD-ROM)
4.4.2 Follow the screen to install the driver.
4.4.3 Power off the system. Insert combo Cardbus into an available Cardbus
slot. Power up the system
4.4.4 During OS boot up, Windows will display the “Found New Hardware
wizard”, “Universal Serial Bus (USB) controller”, Click “Next”
4.4.5 Select “Search for a suitable driver for my device (recommended)”
and click “Next”
4.4.6 When the wizard indicates that it found a driver for the device click
“Next”
4.4.7 The wizard will now copy the required driver to the system and start the
driver. After starting the driver the wizard will display a completion
dialog, click “Finish” to exit the wizard