BAFO BF-4710 - Manual (Page 4)

USB 2.0 4-Port & IEEE1394 3-Port HUB User’s Manual 4
5.2 Windows
®
ME,2000 & XP Driver Installation
The setup procedure is similar as the windows 98, please follow the step to
install it.
5.3 MAC OS X Driver Installation
After connect USB 2.0 4-Port and IEEE1394 3-Port HUB to MAC, system will
load driver automatically.
After installation is complete, you have to check “Apple system Profiler”-
“About this computer” and you can see a new Hub appears under the USB
High-Speed Bus. Check the properties and you can see the device speed is
“Up to 480Mb/sec”.
6. IEEE1394 Installation
It does not need any extra driver in IEEE1394 Installation.
6.1 Windows ® 98SE Installation
After connect USB 2.0 4-Port and IEEE1394 3-Port HUB to PC, system will load
driver automatically.
While installation is complete, you have to check “My Computer”-“Control
Panel”-“System”-“Device Manager” and you can see a “SBP2”.