Fcc statement – BAFO BF-4710 User Manual
Page 5
USB 2.0 4-Port & IEEE1394 3-Port HUB User’s Manual 5
6.2 Windows
®
ME,2000 & XP Driver Installation
The setup procedure is similar as the windows 98, please follow the step to
install it.
6.3 MAC OS X Driver Installation
After connect USB 2.0 4-Port and IEEE1394 3-Port HUB to MAC, system will
load driver automatically. After installation is complete, you have to check
“Apple system Profiler”-“About this computer” and you can see a new Hub
appears under the USB High-Speed Bus. Check the properties and you can
see the device speed is “400Mb/sec”.
7. FCC Statement
This device generates and uses radio frequency and may cause interference to
radio and television reception if not installed and used properly. This has been
tested and found to comply with the limits of a Class B computing device in
accordance with the specifications in Part 15 of FCC Rules. These specifications
are designed to provide reasonable protection against such interference in a
residential installation. However, there is no guarantee that interference will not
occur in a particular installation. If this device does cause harmful interference to
radio or television reception, which can be determined by plugging the device in
and out, the user can try to correct the interference by one or more of the
followings:
Reorient or relocate the receiving antenna.
Increase the separation between the device and receiver.
Connect the computer into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help