BAFO BF-321 - Manual (Page 3)

BF-321 USB2.0 to Ethernet Adapter User’s Manual 3
6. Driver Installation
NOTICE: Before you install the driver to your computer, please do not connect
the BF-321 USB 2.0 to Ethernet Adapter to your computer.
+ , - . /0
Following the steps below to install driver of BF-321 USB 2.0 to Ethernet
Adapter :
6.1.1 Turn on the power of computer and make sure the USB port is enabled
and can working properly.
6.1.2 Insert the driver of BF-321 USB 2.0 to Ethernet Adapter into the
CD-ROM drive.
Select “Install Products - BF-321 USB 2.0 to Ethernet Adapter -
Install” .
6.1.3 Click the “Install” to continue.
6.1.4 Click “ Exit ” to end this installation.
6.1.5 Plug the BF-321 USB2.0 to Ethernet Adapter into USB Port of PC.
Windows® will detect an USB Device. Your new hardware is installed
and ready to use.