BAFO BF-100C User Manual
Page 2
USB File Transfer Cable User’s Manual 2
5.
Driver Installation
5.1 Windows
®
98 Driver Installation
Following the steps below to install driver of PC-Linq USB cable:
5.1.1 Power on both computers that you will connect the PC-Linq cable and
make sure USB port is enabled and working properly.
5.1.2 Plug in the PC-Linq cable into the USB port. Windows
®
will detect an
USB Device and run the Add New Hardware Wizard to assist you in
setting up the new device.
5.1.3 Insert the driver of PC-Linq into CD-ROM drive; click “Next” to
continue.
5.1.4 Select “Search for the best driver for your device” and click
“Next”.
5.1.5 Select Specify a location and type “D:\Driver\USB FILE TRANSFER
CABLE\Windows” (D: represents CD-ROM) in the dialogue, then
click “NEXT”