BAFO BF-100C - Manual (Page 9)

USB File Transfer Cable User’s Manual 9
5.5 Windows ® 2000 Driver Installation
Following the steps below to install driver of PC-Linq USB cable:
5.5.1 Power on both computers that you will connect the PC-Linq cable and
make sure USB port is enabled and working properly.
5.5.2 Plug in the PC-Linq cable into the USB port. Windows ® will detect an
unknown device and run the “Upgrade Device Driver Wizard” to
assist you in setting up the new device.
5.5.3 Insert the driver of PC-Linq into CD-ROM and select the “Search for a
suitable driver for my device (recommended)” and click next.
5.5.4 Select CD-ROM drives then click “NEXT”.