Baja Motorsports RT50-R Operator's Manual - Manual (Page 14)

11
Pre-Ride Checklist (continued)
Before Starting the Engine/Motor
1. Engine oil level
a) Check for leaks
b) Tighten filler cap securely.
c) Add oil if required.
2. Fuel level
a) Add fuel as necessary.
b) Do not overfill (no fuel in the filler neck).
c) Do not mix oil with gas.
d) Replace cap tightly.
e) Do not refuel a hot engine. Allow engine to cool before adding
fuel.
3. Warning decals
a) Make sure all warning decals are legible and securely attached.
b) Replace as necessary.
4. Tires
a) Ensure that both tires have at least 1/8 in. tread depth at center.
b) Both tires must be inflated to the pressure indicated on the tire
sidewalls.
c) Replace the tires if tread height is less then 1/8 in. at the center of
tires.
5. Throttle
a) Check for smooth operation. Make sure the throttle “snaps” back
to idle position when released.
b) Check for frayed cable or damaged cable housing. Replace
damaged cable.
c) Check for mud, debris and ice in the throttle cable/mechanism.
Clean out any contamination.