Maintenance (continued), Adjustment of rear brake, Brakes – Baja Motorsports RT50-R Operator's Manual User Manual

Page 28

Advertising
background image

25

1. Inspect front disk brake caliper (1) for leakage. If brake fluid leaks, the

safety of riding could be affected.
2. Inspect the brake hose (2) for cracks, and the joint for leakage.
3. Check the brake fluid level through the sight gauge on front of brake fluid

reservoir (3). If level is at or below the LOWER mark, inspect brake pads for

wear and hydraulic system for leaks.
4. To add brake fluid, unscrew the 2 screws (4) on top of the brake fluid

container located on right handlebar. Add DOT3 or DOT4 brake fluid. Do not

mix brake fluid types.

Maintenance (continued)

ADJUSTMENT OF REAR BRAKE

1

1. To make rear break adjustment,

turn rear adjusting nut (1)

clockwise to increase and

counterclockwise to reduce

tension on the brake cable.

2. Brake shoes should be replaced

by a qualified service technician

once worn.

1

2

Brakes

FRONT HYDRAULIC DISK BRAKE INSPECTION

3

4

Advertising
This manual is related to the following products: