Balanced Audio REX II Preamplifier - Manual (Page 20)

20
INPUT NAME programming:
The REX II allows the user to assign any a custom name to any input. Those names
may include up to four characters. The default names for the inputs are as follows:
1 TAPE
2 TUN
3 CD!
4 AUX1
5 AUX2 (It will automatically switch to PH1 if the optional phono card is
installed)
Any combination of up to four Latin, Cyrillic, Greek alphabet characters or digits can
be used to name the source. The examples may include:
CD-2, DVD1, JOHN, VKD5, MARY, BOB1, etc.
To program the input name, do the following:
Select the desired input
Press the Function button eight times. The first character of the input name will
start blinking
Use the volume control knob or the remote control Volume Up/Down buttons to
select the desired character. The characters are organized in the following
order: the digits, the Latin alphabet, the Cyrillic (Russian) alphabet, the Greek
alphabet.
Advance to the next character by pressing the Function button once.
Exit the programming mode by pressing and holding the Function button .