Balanced Audio REX II Preamplifier - Manual (Page 24)

24
RESETTING THE REX II:
Under certain conditions it might become desirable to reset the internal
microprocessor that controls all the functions of the REX II.
Doing so will erase ALL user programmed setpoints, and will return the unit to its
factory default state.
In order to RESET the REX II, do the following:
1. Turn the unit OFF.
2. Disconnect the power cord from the back of the Control Module.
3. Wait about two minutes.
4. Press AND HOLD front panel buttons Input 3 and Input 5.
5. WHILE HOLDING the buttons, insert the power cord.
6. Power up the unit normally.