Balanced Audio VK-P6SE Phonostage - Manual (Page 11)

Fuse Protection
A blown fuse in the VK-P6SE may be an indication of a serious problem. If a
replacement fuse fails as well, no further attempts should be undertaken.
Please contact the factory for professional service.
The proper fuse ratings are as follows:
For 100-120 VAC Units: 2A 250V Slow Blow
For 200-240 VAC Units: 1.5A 250V Slow Blow
WARNING:
Factory supplied fuses should be only replaced with the same type
and rating parts.
Servicing
The Balanced Audio Technology VK-P6SE should require no service other than
changing tubes to maintain its high performance. The vacuum tubes used in
the VK-P6SE are high quality 6922’s and 6SN7’s rated for approximately
5000 hours of use. Please direct any further service inquiries to the factory.
Cleaning
To remove dust, occasionally wipe the front and top surfaces of your VK-P6SE
with a damp soft cloth. If fingerprints appear, you may use a mild, non-
alkaline soap solution. Do not use abrasive cleaners, as they may damage the
fine finish of the unit.