Balanced Audio VK-P6SE Phonostage - Manual (Page 6)

Reseating Tubes
Normally, reseating tubes upon delivery is not required. However, if any
tubes have noticeably drifted out of position due to unusually high
transportation stress, it will be advisable to reseat the tubes. Use the
supplied Torx wrench to remove the top cover.
Reseat the tubes in their sockets and reinstall the top cover.
NOTE: When using the Torx wrench, make sure it is fully inserted so that the
screw head is not stripped.
Physical Placement
It is recommended that you provide for at least 6" of free space around the
unit for proper ventilation.
Mount the unit on a hard surface with proper ventilation underneath.
Do not stack the VK-P6SE phono stage on top of other units, nor vice
versa.
General Description of VK-P6SE Phono Preamplifier
The VK-P6SE balanced all-tube phono stage is designed to provide the
maximum possible performance while operating in conjunction with the wide
verity of phono cartridges available today. The unit offers high degree of
versatility in system configuration by providing the following features:
- User-selectable gains of 50dB and 56dB
- Selectable cartridge loading for both resistance and capacitance
Please refer to the Configuration Switches section of this manual for
information on how to configure the VK-P6SE phono stage for optimal
performance in your system.