Baumatic B25SE - Manual (Page 16)

15
Switching on energy saving mode
This setting should be used if you wish to save energy when using
your appliance. It will increase the temperature slightly in the fridge
and freezer sections to save energy.
o
Press the ‘ENERGY SAVING’ button on the display to turn energy
saving mode on and off. When it is on the energy saving symbol
will be illuminated. The fridge will be set to 7°C and the freezer
to -15°C
IMPORTANT: You should not run the appliance in
energy saving mode if you want to freeze fresh food
in the freezer section. Before attempting to freeze
fresh food you should return the appliance to normal
operation and use the fast freeze mode.
Returning the appliance to normal operation
o
If you wish to cancel rapid cooling mode, holiday mode or energy
saving mode you have to press the relevant button once. Please
ensure that the corresponding indicator turns off, confirming that
the function has been stopped.
o
If you wish to cancel fast freeze mode, press that fast freeze
button and scroll through the time length options until you scroll
once past 48 hours. Ensure that the fast freeze indicator turns
off, confirming that the function has been stopped.
o
IMPORTANT: If you have fast freeze and rapid cooling modes
active simultaneously, then you will need to cancel them
separately.
Child Lock function
This setting locks the display control panel. None of the buttons except
the ice-water selector key and the filter reset key will work while it is
in locked mode, preventing accidental misuse.
o
The Child lock function will automatically activate after 60
seconds of inactivity and the lock icon will turn on.
o
Press the ‘LOCK/UNLOCK’ button for 3 seconds to manually
activate or deactivate the child lock function.
o
When locked, the lock icon will flash and beep if any other
buttons are pressed to indicate that the control panel is locked.