Baumatic BMM204SS - Manual (Page 25)

25
a Install tion
The installation must be carried out by a suitably
the Scottish Development
rk Regulations.
c
OUR MICROWAVE IS INTENDED FOR FITTED AND
ERMANENT INSTALLATION.
g the appliance, make sure that the supply
cted by a qualified
who will
sition adjacent to the
appliance. The spur outlet must still be accessible even when
your microwave is located in its housing.
qualified person, in accordance with the current
version of the following.
o
UK Regulations and Safety Standards or their European
Norm Replacements.
o
Building Regulations (issued by the Department of the
Environment).
o
Building Standards (issued by
Department).
o
IEE Wiring Regulations.
o
Electricity At Wo
Electrical
onnection
Y
P
o
Before connectin
voltage marked on the rating plate corresponds with your mains
supply voltage.
o
We recommend that the appliance is conne
electrician, who is a member of the N.I.C.E.I.C. and
comply with the I.E.E. and local regulations.
o
WARNING: THIS APPLIANCE MUST BE EARTHED.
o
This appliance is supplied with a moulded plug, which must be
connected to an earthed socket.
o
If in future you need to change the fuse in this plug, then a 13
amp ASTA approved (BS 1362) fuse must be used.
o
If the earthed socket is not accessible after the appliance is
installed. Then the microwave must be wired into a 13 A double
pole switched fused spur outlet, having 3 mm contact separation
and placed in an easily accessible po