Xela – BDI 1140 XELA User Manual
Page 11
Advertising
XELA
1146
ASSEMBLY INSTRUCTIONS
3
BDIUSA.COM [email protected]
Step 4
Install Legs onto Table Top
Carefully place
Table Top ( J) on its back on a carpet
or a blanket to prevent damage. Align holes in Leg with
Cam Bolts (E) and Dowel Pin (D) in Table Top (J), then
slide leg into place until top of Leg is flush with Top of
Table. Tightening
Cam Fasteners (C) will draw
components together.
Step 5
Tighten Cam Fasteners
Tighten
Cam Fasteners (C) with Hex Driver (B).
Tightening Cams will draw
Table Top (J) and Leg
components together flush.
L- Left Leg
K - Right Leg
J - Table Top
B
Advertising
This manual is related to the following products: