BDI 1140 XELA - Manual (Page 15)

XELA
1148
ASSEMBLY INSTRUCTIONS
3
BDIUSA.COM [email protected]
Step 4
Install Legs onto Table Top
Carefully place Table Top ( J) on its back on a carpet or a blanket to prevent damage. Align holes in
Leg with Cam Bolts (E) and Dowel Pin (D) in Table Top (J), then slide leg into place until top of Leg is
flush with Top of Table. Tightening Cam Fasteners (C) will draw components together.
Step 5
Tighten Cam Fasteners
Tighten Cam Fasteners (C) with Hex Driver (B).
Tightening Cams will draw Table Top (J) and Leg
components together flush.
L- Left Leg
K - Right Leg
J - Table Top
B
Flush Table Top with Legs.
Tightening Cams will draw components together.